The first month is critical
Prepare for the fact that your new surface must fully mature before it can have its final properties. Therefore, during the first four weeks after installation, follow these recommendations:
⏳ The first 48 hours
Although you can walk carefully on the surface, it is only at 60% of its full strength. Minimize traffic as much as possible.
📅 The first week
Continue to move carefully and avoid cleaning or wetting the surface.
📅 The second week
You can start with gentle cleaning with water only.
📅 The first month
Microcement reaches its maximum hardness and durability after 4 weeks. During this time, protect the floor and avoid moving furniture.
Day-to-day maintenance
Once the microcement has fully matured, follow these instructions for daily care:
Clean only with suitable products
Use water and pH-neutral soap with non-abrasive mops or sponges. Imagine caring for a natural stone floor.
Choose the right cleaning products for porous surfaces, such as James Bandit.
Keep the surface dry
Some microcements are completely waterproof. For others, avoid leaving puddles or wet objects on the surface for extended periods.
Protect against wear and tear
Use mats at entrances to prevent sand and pebbles from scratching the surface. Protect furniture legs and avoid dragging objects.
Avoid contact with aggressive substances
Be careful with products such as bleach, acetone and ammonia. Wipe them off quickly to prevent staining. Acidic substances such as vinegar or lemon juice can also leave marks if left for more than two hours.
Long-term care
Microcement is not forever and despite all the care it takes, the material eventually wears out. However, you can revitalise the surface with appropriate procedures to extend its life.
New protective layer
Apply a new sealing layer to restore the microcement to its original state.
Special care products
Consider using microcement maintenance and protection products such as Floor Protect, which protects against water, revives and protects worn surfaces and restores light scratches to the floor. Simply apply and spread with a mop and your floor will be safe again for a long time.
Microcement and continuous coating. What to watch out for?
To keep your surfaces in the best possible condition, pay particular attention to the following situations that pose a risk of permanent damage to the microcement surface.
🧪 Aggressive chemicals
Avoid chlorine-based products, hydrochloric acid and alkaline cleaners with a pH higher than 12.
☕ Stain-causing substances
Be careful with oils, coffee, wine and sugary drinks.
🔥 Heat
Although microcement can withstand high temperatures for short periods, avoid permanent contact with heat sources. Use pads under hot pots and pans.
Following these guidelines will ensure that your surfaces remain beautiful and durable for many years. If you need advice on proper maintenance and choosing the right cleaning products, please contact us and we will be happy to help.